欧美日韩在线视频,欧美亚洲日本国产,97久久超碰日韩精品,天天干夜夜想

歡迎進入濟南濟柴環能燃氣發電設備有限公司官網!
當前位置:首頁 - 新聞中心 - 公司新聞

公司新聞

瓦斯發電機組進行小修的目的和內容

返回 2022.08.31 來源:http://www.vw95.cn 0
瓦斯發電機組小修的目的主要是排除瓦斯發電機組使用過程中發生的常見故障,用更換或修理個別零件的方法,使瓦斯發電機組保持良好的工作狀態。這種小修方式要包括工作時所發生的臨時故障,維護保養中發現的故障隱患,以及更換個別嚴重磨損的零件等。
The purpose of minor repair of gas generator set is mainly to eliminate the common faults occurred during the use of gas generator set, and to maintain the gas generator set in good working condition by replacing or repairing individual parts. This minor repair method shall include temporary faults occurred during work, potential faults found during maintenance, and replacement of individual severely worn parts.
小修的內容:
Contents of minor repair:
1、檢查并排除瓦斯發電機組的三漏現象,對瓦斯發電機組外部機件的松動現象,要按規定力矩固緊。
1. Check and eliminate the "three leakage" phenomenon of the gas generator set, and tighten the external parts of the gas generator set according to the specified torque.
2、檢查噴油泵和噴油器的各種技術參數,不正確時,應按規定的數據進行調整。
2. Check the various technical parameters of the fuel injection pump and injector. If they are incorrect, adjust them according to the specified data.
3、按技術要求調整氣門間隙。
3. Adjust the valve clearance according to the technical requirements.
瓦斯發電機組
4、更換活塞環時,要對氣缸蓋,氣缸套上部和活塞環槽內的積炭進行清除,裝配活塞環時,還應檢查環口的開口間隙。
4. When replacing the piston ring, remove the carbon deposits in the cylinder head, the upper part of the cylinder liner and the piston ring groove. When assembling the piston ring, check the opening clearance of the ring mouth.
5、更換潤滑油并清洗油底殼。
5. Replace the lubricating oil and clean the oil pan.
6、檢查起動系統的所有部件并按要求進行清洗和調整。
6. Check all components of the starting system and clean and adjust them as required.
7、更換部分損壞的零件,必要時,對瓦斯發電機組內部的運動機件進行檢查。
7. Replace some damaged parts. If necessary, check the moving parts inside the gas generator set.
瓦斯發電機組進行小修的目的和內容這一事項內容的講解希望能夠給您好的幫助,當然平常使用中還是要對其做好相關的保養維修事項才行,更多內容就來我們網站http://www.vw95.cn獲取得到吧!
The purpose and content of minor repair of gas generating units are explained in the hope that they can help you. Of course, it is necessary to do a good job in the maintenance and repair of gas generating units during normal use. For more information, please visit our website http://www.vw95.cn Get it!
新聞搜索
濟南濟柴環能燃氣發電設備有限公司
  • 服務熱線

    0531-62325028
    0531-69951266

瓦斯發電機組進行小修的目的和內容

瓦斯發電機組小修的目的主要是排除瓦斯發電機組使用過程中發生的常見故障,用更換或修理個別零件的方法,使瓦斯發電機組保持良好的工作狀態。這種小修方式要包括工作時所發生的臨時故障,維護保養中發現的故障隱患,以及更換個別嚴重磨損的零件等。
The purpose of minor repair of gas generator set is mainly to eliminate the common faults occurred during the use of gas generator set, and to maintain the gas generator set in good working condition by replacing or repairing individual parts. This minor repair method shall include temporary faults occurred during work, potential faults found during maintenance, and replacement of individual severely worn parts.
小修的內容:
Contents of minor repair:
1、檢查并排除瓦斯發電機組的三漏現象,對瓦斯發電機組外部機件的松動現象,要按規定力矩固緊。
1. Check and eliminate the "three leakage" phenomenon of the gas generator set, and tighten the external parts of the gas generator set according to the specified torque.
2、檢查噴油泵和噴油器的各種技術參數,不正確時,應按規定的數據進行調整。
2. Check the various technical parameters of the fuel injection pump and injector. If they are incorrect, adjust them according to the specified data.
3、按技術要求調整氣門間隙。
3. Adjust the valve clearance according to the technical requirements.
瓦斯發電機組
4、更換活塞環時,要對氣缸蓋,氣缸套上部和活塞環槽內的積炭進行清除,裝配活塞環時,還應檢查環口的開口間隙。
4. When replacing the piston ring, remove the carbon deposits in the cylinder head, the upper part of the cylinder liner and the piston ring groove. When assembling the piston ring, check the opening clearance of the ring mouth.
5、更換潤滑油并清洗油底殼。
5. Replace the lubricating oil and clean the oil pan.
6、檢查起動系統的所有部件并按要求進行清洗和調整。
6. Check all components of the starting system and clean and adjust them as required.
7、更換部分損壞的零件,必要時,對瓦斯發電機組內部的運動機件進行檢查。
7. Replace some damaged parts. If necessary, check the moving parts inside the gas generator set.
瓦斯發電機組進行小修的目的和內容這一事項內容的講解希望能夠給您好的幫助,當然平常使用中還是要對其做好相關的保養維修事項才行,更多內容就來我們網站http://www.vw95.cn獲取得到吧!
The purpose and content of minor repair of gas generating units are explained in the hope that they can help you. Of course, it is necessary to do a good job in the maintenance and repair of gas generating units during normal use. For more information, please visit our website http://www.vw95.cn Get it!